Skip to main content
  • International Free Shipping & Free Returns
  • We Price Match
  • 100% Money back Guarantee
We are revamping our website, you might get some issues while browsing, kindly message us on +91 9016106290 or email us at [email protected]

A Complete Encyclopedia of Impressive I color Diamond

Color is perhaps the main part of a diamond’s visual appearance. We are going to mention here everything that you need to know about colored diamonds. This article will be an encyclopedia for you to know about diamond color i.

In case you’re hoping to boost the presence of your diamond, look no farther than the close to drab evaluations like G, H, I, and J tone, an I color diamond is regularly seen as the sweet spot where purchasers can amplify the frosty white look of the diamond while purchasing at a much lower value point than an H color diamond.

What amount does an I color diamond cost?

i color diamond

The normal cost of a one carat I color diamond is around $5,000 as per our I color diamond value graph. This cost accepts the diamond as a GIA “triple excellent” 1 carat round I color diamond with VS2 clearness and no fluorescence. 

Triple excellent diamonds have been evaluated as amazing as far as to cut, clean, and evenness. So you can find a lower category I diamond is probably a lesser price, but the best diamond will cost you the best price. 

At almost twofold the value, the D color diamond is genuinely a white stone; however, this will be lost to the normal eyewitness. Therefore, I color diamond is always preferable from the point of view of its cost. 

Also Read: A Comparative Analysis Between Black and White Diamond 

What is the meaning of an I color diamond?

color grading scale

I color diamonds are the 3rd grade of “near-colorless” diamonds. Close to near colorless diamonds territory from G – J and are the most run-of-the-mill diamond grades picked in engagement rings diamond very since they balance both excellence and moderateness.

I color diamonds (like most diamonds) that may have a weak yellow tone when seen from the side. However, they ought to by and large face-up white to a spectator. Yet, it’s simpler to show you how real the distinctions are between various diamond color grades than it is to clarify them. 

For the most part, I tone thought to be an extraordinary blend of significant value and tasteful for use in diamond gems. It is one of the worthiest diamonds to buy for you or your family among different color diamonds.

Check out these 1 carat VS1 lucidity diamonds, which lie in the color grades from D – Z tone altogether (all with no fluorescence). Do you see a significant contrast in color? The vast majority can’t differentiate between any of the underneath aside from the N-Z tone.

It’s important; diamond color grades are not steady across the entirety of the evaluating agencies. When we talk about diamond color, we are alluding to the GIA evaluating scale, which is broadly perceived as one of the strictest and most steady reviewing scales on the planet. 

The AGS has a likewise stellar reputation while some other reviewing organizations will, in general, inflate the grades of their diamonds comparative with these more regarded institutions. But, above all, GIA is the most trustworthy evaluation. 

What is the ideal carat weight for an I color diamond? 

As a diamond’s carat weight increases, the presence of color additionally turns out to be more self-evident. As a rule, I color diamonds will look white to the vast majority, even bigger carat weights. 

Once more, color sensitivity is an individual preference. Nonetheless, going up or down one color grade influences value more altogether than venturing up or down in transparency (as a rule). So, you can choose any carat weight as per your budget and preference.

I color diamond – a decent decision for an engagement ring or studs

I color diamonds are an incredible decision for diamond jewelry like an engagement ring, wedding band, necklace, or studs. It is because I color diamonds offer a decent equilibrium of magnificence and affordability. 

You ought to know how the diamond’s size and state (too, as its fluorescence) can affect the presence of color to the naked eyes. It is undoubtedly one of the best choices for an engagement ring or stud if everything goes well. 

There are a few factors that can influence the ideal color grade for your diamond. To start with, lower color grades are a preferred decision for smaller diamonds over they are for bigger diamonds overall as a smaller diamond hides its tone better compared to a bigger stone. 

Second, a fancy cut diamond will, in general, show its tone better compared to a round diamond. Third, the shade of your setting will influence how an easygoing onlooker sees the shade of your diamond. 

A yellow or rose gold color evaluation will make your diamond look somewhat more white than it would in a white gold or platinum setting. At last, a near-colorless or faintly colored diamond with weak or medium fluorescence can look marginally more white than an identical diamond with no fluorescence.

Is it correct to say that I Color Diamonds are too yellow?

Recall that a few groups are more delicate to color than others; however, as a rule, I color diamonds are a great decision for most purchasers and will look up white in white gold, platinum, yellow gold, or platinum settings. 

It is also imperative to note that the impression of color is relative. For example, a diamond will consistently look more white whenever put in a setting and yellower when seen as a free diamond. 

Diamonds also look a lot more white when seen from above than when seen from the side. Every diamond looks better, brighter, and whiter when seen from the top face as the light is more focused on that part.

Also Read: I Color Diamonds: Are They Worth Buying?

What color setting works best with an I color diamond? 

I color diamonds function admirably in any setting tone, including platinum, white gold, yellow gold, and rose gold. If you are anxious about the presence of color, a yellow or rose gold setting is your smartest option, as hazier settings can cause a diamond to show up marginally more white. 

Which fluorescence grade is best for an I color diamond? 

A little bit of diamond fluorescence can assist a diamond with seeming more white in certain lighting conditions where UV light is available. Notwithstanding, an excess of fluorescence can be something awful. 

In specific occurrences, the presence of solid fluorescence can make a diamond look “sleek” or “cloudy.” Hence, by and large, RRP Diamonds suggest keeping away from Strong and Very Strong fluorescence to decide in favor of security. 

For I color, we suggest none, weak, or medium fluorescence. It will good and create an expel over the spectator by creating a powerful aura of beauty around it. We can also guide you in choosing the best setting for a color grade. 

Where to buy the best i color diamonds?

Whenever you want to buy the best and certified I color diamonds, the first and the foremost choice that should have come to your mind is RRP Diamonds. At RRP Diamonds, we have a wide range of carat weights and settings available for your I color diamond. 

You can visit our website and book an appointment with our gemological expert to know more about the I color diamond and get the best deal for you. You can also get I color diamond jwellery at our RRP jewelers. 


Hope this article will help you like an encyclopedia of an I color diamond. And you can get all the needful information regarding the diamond before making a good online purchase for the very impressive I color diamond. 

Mined diamonds

Custom Size Request
✓ Valid
Note: Maximum 3 photos are allowed to upload (Size should be less than 2 mb)


Already Registered?

Consultation Request
✓ Valid


We’ll return payments from countries not on this list to the sender. This can take 3–10 working days.


United States, Canada.


China, Hong Kong, India, Japan, Philippines, Singapore, Taiwan, United Arab Emirates.


Australia, New Zealand.


Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gibraltar, Guernsey, Greece, Hungary, Iceland, Ireland, Isle of Man, Italy, Jersey, Latvia, Liechtenstein, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, United Kingdom.



What's a reference?

The reference code helps us confirm your payment. When you make your bank transfer to pay, please make sure you write it in the reference field.

Did they ask for a routing number?

A routing number is not required to add or receive USD from bank accounts outside the US. But if they specifically ask for a routing number, you can give them this:


Do you need a bank address?

If you need a bank address to make the payment, you can enter:

89-16 Jamaica Ave
Woodhaven NY 11421
United States

You may be asked by your financial institution if you mean Community Federal Savings Bank. That’s because Community Federal Savings Bank is our partner bank in the US.

It’s okay to make a transfer with Community Federal Savings Bank as the bank name — we’ll still process it.